HED Solutions Multi Zone

Home

Multi Zone

Multi-Zone disabled toilet indicator (6 zones) Ref: AA3111OD

The Multi-Zone disabled toilet alarm system is designed for larger premises which require central indication of alarm calls from toilets. The system caters for up to 6 toilets and is designed to give dual re-assurance at the point of operation. If you require a system for more than 6 toilets, simply stack systems together or call us for further options.
When a pull cord (S1600) is operated its LED flashes and a local buzzer (S1678) sounds to inform the caller that the call has been transmitted. When the call is silenced at the panel the flashing LED becomes steady and the local buzzer silences to inform the caller that the call has been received and help is on the way. If the caller pulls the cord again the LED on the pull cord will flash and the local buzzer sounds again. When help does arrive and the call is reset then all LED's and buzzers, flashing or steady are extinguished. An integral PSU and battery are included.

In addition to the A31110D control panel you will require the following for each toilet:

1 x pull cord (S1600)

1 x over door light / sounder (S1678RP or S1678RS)

1 x reset button (S1608P or S1608S)

This system is fully compliant with BS8300 and the requirements of the Disability Discrimination Act.

More information…
Price: £267.95 (Excluding VAT at 15%)

Quantity:

Ceiling Pull Cord Ref: S1600

Non-latching ceiling pull cord with re-assurance LED for use directly with AIDLARMs above.
This unit has voltage free SPCO contacts. The LED incorporates a current limit resistor for use on 12vdc.
Has an anti - ligature facility, with a breaking weight of 46 pounds and is 2.5metres long. However, it is considered against best practise to install a pull cord into a mental health unit due to the risk it poses. Call buttons in the toilet or Panic strip is recommended.

Price: £12.65 (Excluding VAT at 15%)

Quantity:

Reset Button ABS plastic Ref: S1608P

Wall mounting RESET button. ABS plastic C/W surface mounting box.

Price: £14.46 (Excluding VAT at 15%)

Quantity:

Reset Button Stainless Steel Ref: S1608S

Stainless steel engraved vandal resistant reset button. This is a non-latching unit with change over contacts.

These items are usually supplied with a galvanised steel mounting box to enable them to be flush fitted to the wall. For surface fitting go to S0610 mock stainless steel pattress.